Tel: +86-371-65669681
Fax: +86-371-65669601
Email:[email protected]
Web: http://www.concrete-batching-plants.org/
Some users may be aware of the concrete batching plant’s foundation is not as deep as possible. In fact, the foundation should be done according to the actual situation, must be in accordance with the requirements of the manufacturers to ensure the safety of the foundation. Size and depth should be in accordance with the requirements of the drawings, the strength of concrete to meet the requirements, the basic depth is not required, as long as the basis of the elevation and concrete batch plant can be consistent with the ground.
So what should be noticed about details of foundation? Firstly, since dimension error between two foundations should not be more than 50mm, alignment work should be done according to technical requirements of concrete batching plant to capture datum point. When excavate foundation, on the one hand, center line of foundation should be reserved by rebar or peg; on the other hand, two center lines on one foundation should be on the same line and deviation less than 20mm can be allowed.
What’s more, bar-mat reinforcement is needed to be paved in the foundation of concrete batching plant and level gauge must be adopted to test level of concrete batching plant foundation. More matters about foundation construction of concrete batching plant can be consulted by telephone, and then Daswell will provide detailed instructions.
Copyright 2010-2022 All Right Reserved Henan DASWELL Machinery Co.,Ltd.